Black Box IPBX1224 Скачать руководство пользователя

Страница: 37 / 52

724-746-5500 | blackbox.com

Page 37

Chapter 3: Installation

STEP 3J: Configure outgoing call rules.

Outgoing call rules let you define how outbound calls are handled by the Hybrid PBX and VoIP Gateway.

Figure 3-18. Outgoing Call Rules screen.

Configure the settings on this page as described below and then click “Next” to continue.

Default settings for outgoing calls

• CallerID Name: Specify the text that will appear in the caller ID for all calls made through the Hybrid PBX and VoIP Gateway.

• CallerID Number: Specify the phone number that will appear in the caller ID for all calls made through the Hybrid PBX and VoIP

Gateway.

• Emergency: Specify the number to dial for emergency calls and select the line to use.

Outgoing call rules

Use this section to define the rules that determine how a user selects an outbound line when making a call. To add a new rule,
click “Add” and see “Adding an outgoing call rule,” below.

IMPORTANT: By default, an outgoing call rule is automatically defined for Analog calls. To support VoIP calls, you need to add

new rules.

The following information is displayed for each rule:

• Dial Prefix: Number to dial to select the rule.

• Line 1: First line to use. If this line is not available, Line 2 is attempted.

• Line 2: Second line to use. If this line is not available, Line 3 is attempted.

Содержание IPBX1224





















































Результаты поиска

Содержание IPBX1224

Отзывы:

Похожие инструкции для IPBX1224

Бренды по названию

Популярные бренды

Black Box IPBX1224, Руководство по установке

Результаты поиска

Содержание IPBX1224

Отзывы:

Похожие инструкции для IPBX1224

Бренды по названию

Популярные бренды