Black Box IPBX1224 страница 18 Скачать руководство пользователя | Manualshive

Страница: 18 / 52

background image

724-746-5500 | blackbox.com

Page 18

724-746-5500 | blackbox.com

Chapter 3: Installation

Figure 3-3. Sample MAC address printed on label.

STEP 1J: Read all safety disclaimers and installation warnings (see below).

Power

Only use the power supply provided with the Hybrid PBX and VoIP Gateway. The Hybrid PBX and VoIP Gateway is shipped with
an international plug system rated at 12V/2A. Failing to use the included power supply will void your warranty.

PSTN connections

The Hybrid PBX and VoIP Gateway has been designed to be connected to the public switched telephone network (PSTN) and
should not be connected to any other type of telecommunications service or services. Doing so will void your warranty and may
cause
damage to the Hybrid PBX and VoIP Gateway or any connected network equipment.

Environment

Install the Hybrid PBX and VoIP Gateway in a location that is clean, and free from vibration, electric shock, and temperature/
humidity extremes. The operating temperature should be kept below 104° F (40° C).

3.2.2 STEP 2: Install the Hybrid PBX and VoIP Gateway

The following steps describe how to install the Hybrid PBX and VoIP Gateway hardware and connect all cables for a typical instal-
lation.

STEP 2A: Install auxiliary memory.

Install auxiliary memory in a USB port. For requirements, see Section 3.2.1, STEP 1C.

STEP 2B: Connect power.

Connect the power supply to the Hybrid PBX and VoIP Gateway.

• When the Circle light stops blinking, the PBX is fully operational.

• If all the status lights turn on, it means a hardware fault has occurred. Disconnect power, then reconnect power. If the fault

condition persists, contact Black Box Technical Support at 724-746-5500 or [email protected].

STEP 2C: Connect all cables.

Connect the Ethernet ports.

Make the following connections using standard Category 5 Ethernet cables.

• Connect Ethernet Port 1 to the network that provides connectivity to your SIP phones.

• Connect Ethernet Port 2 to the computer you will use to initially configure the Hybrid PBX and VoIP Gateway.

«
...
16
17
18
19
20
...
»

Содержание IPBX1224





















































Отзывы:

Нет отзывов

Похожие инструкции для IPBX1224

Бренд: RTA Страницы: 66

Бренд: Foxconn Страницы: 14

Бренд: Yeastar Technology Страницы: 104

BridgeX BX5020 GT Series

Бренд: Mellanox Technologies Страницы: 64

Бренд: Grandstream Networks Страницы: 10

Бренд: THOMSON Страницы: 77

LBDG-250-DC-8200-1

Бренд: Lindsay Broadband Страницы: 13

Бренд: NetComm Страницы: 2

Бренд: Kunbus Страницы: 30

SMK Access Station Mini

Бренд: Sigfox Страницы: 17

Бренд: Pathport Страницы: 3

Бренд: RFM Страницы: 31

Бренд: Juniper Страницы: 232

Бренд: Juniper Страницы: 394

Бренд: ActionTec Страницы: 89

Бренд: Renu Electronics Страницы: 105

AWGTY-DGOISG86A0

Бренд: AWPLC Страницы: 25

Бренд: Rosslare Страницы: 40

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды