Control Panel
27
Single
: Sets the
Trigger Mode
to
Single
. In
Single Mode
data is a single frame that satisfies the trigger conditions is
captured and displayed, and then stops. The following trigger events are ignored until
Single
acquisition is restarted.
Level Knob
: Turn the
Level Knob
to adjust the trigger level for a selected analog channel. Push the knob to set the
level to the
waveform’s
50% value. If AC coupling is used, pushing the
Level Knob
sets the trigger level to about 0 V.
Trigger Status
: Indicates when the oscilloscope is waiting for a trigger or when a trigger has occurred.
3.4
Run/Stop Key
When the
Run/Stop
key is green, the oscilloscope is running, that is, acquiring data when trigger conditions are met.
To stop acquiring data, press the
Run/Stop
key.
When the
Run/Stop
key is red, data acquisition is stopped. To start acquiring data, press the
Run/Stop
key.
To capture and display a single acquisition (whether the oscilloscope is running or stopped), press the
Single
key. The
Single
key will remain green until the oscilloscope triggers.
3.5
Auto Setup Key
Pressing the
Auto Setup
key will cause the oscilloscope to determine which channels have activity, and it will turn these
channels on and scale them to automatically configure the input to best display the input signals.
3.6
Analysis Keys
Figure 3.5
Common Functions
Search
: Search for events in the acquired data.
for more details.
Navigate
: Navigate through captured data via time, search events, or history frame.
for more details.
History
: Divides the
oscilloscope’s
memory into segments allowing for analysis of individual frames.
for more details.
Decode
: Enable serial decode.
See section Serial Decode for more details.
Содержание 2560B Series
