BK Precision 2560B Series Скачать руководство пользователя страница 43

Страница: 43 / 224

Vertical Control

7.4.4

Label

Customize the label text, of the selected source. The source can be C1 - C4, F1 or F2, and RefA - RefD.

The length of the label is limited to 20 characters. The characters beyond this length will not be displayed.

When the

Display

option is set to

“on”,

the label will be displayed on the right side of the channel offset indicator.

To set and enable a

channel’s

label:

Press the desired channel key.

In the

Channel Menu

, use the touchscreen to press the

Label

option.

–

The

Label

submenu will appear.

•

Select a source to assign the label to the specified source.

•

Enable/disable the label using the

Display

option

•

Set the text of the label in the

Label Text

option.

Figure 7.6

Label Submenu

Label On

Label Off

Figure 7.7

Label

7.4.5

Apply To

Common functions such as Trigger, Cursor, Measure, FFT, Search, Mask Test, Counter, and AWG can be quickly applied
to the selected channel using the

Apply To

option. Once a function is specified, it will switch directly to the function

menu and automatically set that channel as the source.

To apply a function:

Press the desired channel key.

In the

Channel Menu

, use the touchscreen to press the

Apply To

option.

–

A drop-down menu will appear listing the available functions.

–

Use the touchscreen to select the desired function.

Содержание 2560B Series

































































































































































































































Результаты поиска

Содержание 2560B Series

Отзывы:

Похожие инструкции для 2560B Series

Бренды по названию

Популярные бренды

BK Precision 2560B Series, Руководство пользователя

Результаты поиска

Содержание 2560B Series

Отзывы:

Похожие инструкции для 2560B Series

Бренды по названию

Популярные бренды