BK Medical bkSpecto 1300, Руководство по обслуживанию

Страница: 109 / 167

bkSpecto Ultrasound System Troubleshooting
SM41406-4 4-87
9. Select the Allow checkbox next to Change .
10. Select OK twice.
11. Select Close to exit.
Configure Network
NOTE: This is not to be done on the scanner.
The scope of this document does not include network configuration.
It’s important to note however that the network should be configured before configuring the
scanner’s network settings which is the next step (4.49.4).
Configure Scanner
Be sure to configure the network (4.49.3) before continuing with this section.
To Configure the Network on the Scanner:
1. Tap on Tools
button .
2. Tap on Store /
Network.
3. Tap on Network
Drive.
4. Type in the Server Name info.
Note : This the folder path created in the second step (4.49.2). As an example, if the PC
uses IP Address “192.168.1.10” and the folder name is “bkSpectoData” then type in
“\\192.168.1.10\bkSpectoData ”.
5. Enter Username and Password
Note: This user will be allowed to save files in the folder created in 4.49.2.
If the user is a Domain member, it may be necessary to write the Username as
Domain\Username (for example, bkmed\sla , where bkmed is the domain and
bkSpectoDataUser the Username ).
When using a cross cable to connect to the PC to the scanner, use the
Computer name
(for example, b1016\bkSpectoDataUser , where b1016 is the Computer name and
bkSpectoDataUser the Username ).
6. Tab on
Connect to test the connection
1
2
3
4
5
Text, see table below