Bionet BM5VET, Руководство по эксплуатации

Страница: 26 / 227

26
BM5Vet Pro User’s Manual
Power
The BM5Vet Pro monitor uses a DC adapter (100-240 VAC / 18VDC 2.8A). In the event of a power
outage or cable shortage, the monitor automatically switches to battery power to continue
veterinary patient monitoring without data loss.
The built-in battery is intended for back-up use only during power-off.
DC Product information
Manufacture:
BRIDGEPOWER CORP.
Model name: BPM050S18F02
Input Power: 100~240V 1.2A
Output Power: 18 V, 2.8 A
DC Power LED is lit when the DC Power is plugged into the inlet at the back of the product. A
press of the power key makes the machine ready for use.
Caution
This equipment must be connected to a protective earth grounded power supply.
Using non-standard products other than the adapters supplied by us may cause signal
distortion or noise. Be sure to use a genuine adapter that is supplied by our company and is
insulated.
Battery power
It is usually used plugged into the DC adapter and uses battery power during power outages and
portable use.
The battery is attached to the bottom of the equipment and the additional extended battery is
connected to the left side.
Operation
1. Battery Power LED is lit when the machine is in use.
2. Battery is automatically charged when the machine is connected to DC Power Supply. Battery
LED is lit after blinking.
3. The charging status of the battery is displayed with 5 green boxes, each indicating a different
charging level.