Biocare PM-900 страница 82 Скачать руководство пользователя

Страница: 82 / 182

Chapter 6 Parameter Monitoring

--70--

User Manual of Veterinary Monitor

[Stop All.] to terminate NIBP measure.

Automatic Measure

Select [Measure Mode] and then set: Auto. Press the button [NIBP] on the front panel or [Start NIBP] to

manually start the first measure, and the system will automatically and repeatedly perform NIBP

measure according to the time intervals defined in [Interval] when the first measure is done.

If the button [NIBP] is pressed during the idle time between automatic measures, a manual measure will

be conducted. The monitor will continue automatic measures when the manual one is completed.

Press either the button [NIBP] on the front panel or [Stop NIBP] at any time the automatic measure is in

process, and the current NIBP measure will end, but the system will continue its automatic measure.

Press the button [Stop All.] in the window [NIBP Setup] at any time the automatic measure is in process,

all measuring tasks will be instantly ended.

Continuous Measure

Select [Measure Mode] and then set: STAT. Press the button [NIBP] on the front panel or [Start NIBP]

to start continuous measure which occurs every 5 minutes.

Press the button [NIBP] on the front panel or [Stop NIBP] and [Stop All] at any time the continuous

measure is in process to terminate the continuous measure, and the monitor then returns to the Manual

Measure mode.

Attention: if the measure mode is set as continuous measure, when the monitor is turned off and then

boot, NIBP measure mode will be back to manual measure.

Warning



Please regularly check the color, warmth and sensitivity of the animal

’s distal limbs in the process of

measuring blood pressure under Auto and STAT modes. Once any abnormality is found, please

relocate the cuff or terminate blood pressure measure.



Interval Setup

Select [Interval] in the menu [NIBP Setup] when the measure mode is Auto, under the auto mode, the

monitor automatically and repeatedly conducts NIBP measures according to the preset time intervals.

Attention



This option is available only when the [Measure Mode] is Auto.



Alarm Setup

Select [Alarm Setup>>] in the menu [NIBP Setup] and then set in the pop-up menu the alarm attributes of

each NIBP option parameter.



Start /Stop NIBP Measure

Select this option to start or stop NIBP measure in accordance with the preset mode.



Stop All.

Select this option at any time when the measure is in process to terminate all measuring tasks.

Содержание PM-900























































































































































































Результаты поиска

Содержание PM-900

Отзывы:

Похожие инструкции для PM-900

Бренды по названию

Популярные бренды

Biocare PM-900, Руководство пользователя

Результаты поиска

Содержание PM-900

Отзывы:

Похожие инструкции для PM-900

Бренды по названию

Популярные бренды