Biocare PM-900 Скачать руководство пользователя страница 109

Страница: 109 / 182

Chapter 8 Freeze and Review

User Manual of Veterinary Monitor --97--

Chapter 8 Freeze and Review

8.1 Enter Freeze

Press the

button on the panel in non-freeze state. System will display the freeze menu.

Figure 8.1 Freeze Menu

All waveforms are frozen, and waveforms are no longer refreshed or scrolling. Data in the parameter zone

refresh normally.

Attention



Freeze state does not influence OxyCRG, Minitrends, View Other Bed window, and the rhythm lead

display and refreshing

You can press the [Review] button in the freeze state, then select

in the submenu that has

appeared.

The frozen waveform will move left or right. Meanwhile, there will appear an

↗

on the lower right corner

of the bottom waveform. At the bottom of the arrow is a time scale, where the freeze moment is marked [0s].

As waveform moves right, the time scale will turn to -1s, -2s, -3s… in order. The time scale applies to all

waveforms on the screen. It can be viewed for at most 2 minutes, and will not be stored when power is turned

off.

Figure 8.2 Freeze Menu Review

8.2 Remove Freeze

In freeze state, the following operations can be done to remove freeze state:



Push the

button on the monitor panel again.



Execute any operation that will lead to screen adjustment or menu display, e.g.: insert and remove modules,

push the main menu button etc.

8.3 Record Frozen Waveforms

In the freeze menu that has appeared, select [Curve 1], [Curve 2] and [Curve 3].

In the freeze menu, select [Record] button. The recorder will output the selected waveform and the freeze

moment parameter value.

Содержание PM-900























































































































































































Результаты поиска

Содержание PM-900

Отзывы:

Biocare PM-900, Руководство пользователя, Страница: 109 / 182

Результаты поиска

Содержание PM-900

Отзывы: