Biocare PM-900, Руководство пользователя

Страница: 43 / 182

Chapter 4 Animal Management
User Manual of Veterinary Monitor --31--
Chapter 4 Animal Management
4.1 Admit Animal
1. Select the buttons [Main Menu] – [Animal Manage] – [Admit Animal].
2. If the monitor has displayed an animal after the button [Admit Animal] is selected, press [Yes] to remove the
current animal.
3. Input and select all information into the menu [Animal Demographics].
4. Select [OK] to complete the animal information input.
Attention

[Animal Cat.]:
＞
20 kg, 10~20 kg, and
＜
10 kg Different animal types determine different
calculation methods of the monitor as well as safety and alarm limits of some measures.

[Paced]: if select [Yes], and the monitor detects pacing signals, the pacing pulse marker will be
displayed above the ECG waveform.
Warning

No matter whether the animal is accepted or not, the system will give [Animal Cat.] and [Paced] a
default value for each. The user must make sure whether the value is applicable to the animal or
not.

For animals wearing a pacemaker, [Paced] must be set to [Yes]. Or, the pulse may be treated as
routine QRS groups. As a consequence, the system cannot detect when to alarm when ECG
signals are too weak.

For non-pacemaker animals, [Paced] should be set to [No]. Or, the system cannot detect ventricular
premature associated arrhythmias (including PVCs counts).
4.2 Quick Admit
When you have no time to fill in the animal‘s detailed information in a special or urgent situation, adopt the quick
animal acceptance model. The complete detailed information can be filled in later.
1. Select [Main Menu] – [Animal Manage] – [Quick Admit].
2. If the monitor has accepted an animal after [Quick Admit] is selected, select [OK] to remove the current
animal.
3. Set up [Animal Cat.] and [Paced], and then select [OK].
4.3 Edit Animal Demographics
When the animal‘s information needs to be altered:
1. Select [Main Menu] – [Animal Manage] – [Animal Demographics].
2. Fill in or set up the animal‘s detailed information in the [Animal Demographics] menu.
3. Select [OK] to finish the animal information input.