Biocare PM-900 Скачать руководство пользователя страница 124

Страница: 124 / 182

Chapter 10 Recording (Optional)

--112--

User Manual of Veterinary Monitor



Record Mode Setup

Set Record Mode: Manual, Continuous.



Curve Setup

This series of monitors‘ recorder can print at most 3 curves. User can select curves in the list that has popped

up. Switch to Off, and the curve will not be printed.



Paper Speed Setup

Set Paper Speed: 12.5 mm/s, 25.0 mm/s, 50.0 mm/s. This setting applies to all record tasks that include

curve.



Record Length Setup

When starting a recording, the duration of the recording depends on the setting chosen to the monitor‘s

record length. In [Record Setup] menu, select [Record Length]:



8s: record the curve in next 8s.



Continuous: record the curve after the current moment, till user stops the recording.

Attention



The setting will not work when the record mode is in continuous record.



Print Grid Setup

Select [Print Grid]: On or Off. Select on, the recorder will print the grid; select off, the recorder will not print the

grid.

Attention



If there is no grid on the thermal paper you are using, it is advised to use this option.



Clear All Record Tasks

Select [Clear All Record Tasks] in [Record Setup] window, and it will eliminate all recordings that are to be

printed, also stop the current record task.

10.3 Start and Stop Recording

User can select the modes below to start recording:



Select [PRINT] button on the monitor panel or recording apparatus module, to start real time recording.



Select [Record] button in the current window, and start certain function related recording.

Recorder automatic recording start:



When the alarm switch of the parameters is set to on, and the alarm recording setting is also on. Once the

parameter triggers an alarm, it will also trigger the monitor to start recording.

In the process of recording, you can use these modes to stop recording:



Press [PRINT] button on the monitor panel or recording apparatus module.

Содержание PM-900























































































































































































Результаты поиска

Содержание PM-900

Отзывы:

Бренды по названию

Популярные бренды

Biocare PM-900, Руководство пользователя

Результаты поиска

Содержание PM-900

Отзывы:

Бренды по названию

Популярные бренды