Biocare PM-900, Руководство пользователя

Страница: 40 / 182

Chapter 3 Basic Operation
--28-- User Manual of Veterinary Monitor
3.9 Configuration Management
3.9.1 Recent Configuration Self-recovery
The monitor carries out real-time configuration storage, which is the most recent configuration. When the device
is off time does not exceed the user settings restore recently configuration time, after starting the apparatus
automatically recover recently configuration.
Warning

Accidental power failure may lead to the loss of settings.
3.9.2 Turning-on Default Configuration Setup
When the device is off time exceeds the user settings restore recently configuration time, after starting the
apparatus will restore the configuration selected by a user.
Select [Main Menu] – [Maintenance] – [User Maintain>>], input the user maintain password, and then select
[Defaults Manage>>] – [Select] to set up the valid time for recent configuration recovery and turning-on default
configuration, as shown in Figure 3.5:
Figure 3.5 Default Management
Attention

To know the recovered start configuration, please look up the prompt information at the bottom of
the screen after entering the main screen.
3.9.3 User Configuration Storage
The user can adjust this series of monitors configurations according to need, and store them as the user
configurations. The monitor can store four user-defined configurations at most. The configuration names and
types can be self-defined.
Select [Main Menu] – [Maintenance] – [User Maintain>>], input the user maintain password, select [Defaults
Manage>>] – [Add] to fill in the configuration information (including the self-defined configuration name and
type, in which the configuration type is identical to the animal type). After filling in the information, select [Save]