BinTec elmeg hybird 120, Справочное руководство

Страница: 76 / 757

Chapter 9 Access and configuration
This chapter describes all the access and configuration options.
9.1 Access Options
The various access options are presented below. Select the procedure to suit your needs.
There are various ways you can access your device to configure it:
• Via your LAN
• Via the serial interface (for service technicians and debug purposes only)
9.1.1 Access via LAN
Access via one of the Ethernet interfaces in your device allows the configuration interface
to be opened in a web browser.
9.1.1.1 HTTP/HTTPS
With a current web browser, you can use the HTML interface to configure your device. For
this, enter the following in your web browser's address field
•
7.&//*+,**)
or
7.-&//*+,**)
9.1.2 Access via the Serial Interface
The hybird 120 / hybird 130 features a serial interface which allows a direct connection
with a PC. The following chapter describes what you have to remember when setting up a
serial connection and what you can do to configure your device in this way.
Caution
Access via the serial interface is only recommended for service technicians for debug
purposes and if no LAN access is possible via the pre-configured IP address
(192.168.0.250/255.255.255.0). The possible operations that can be run are displayed
if you enter
?
in the command line and confirm with the Enter key.
9 Access and configuration bintec elmeg GmbH
58 elmeg hybird 120 / hybird 130