BinTec elmeg hybird 120, Справочное руководство

Страница: 407 / 757

Field Description
dress/Netmask corresponding netmask.
Destination Port/Range Only for Protocol =
5
or
!5
Enter a destination port number or a range of destination port
numbers.
Possible values:
• (default value): The destination port is not specified.
•
.3=< . $
: Enter a destination port.
•
.3=< . $ $
: Enter a destination port range.
Source IP Address/
Netmask Enter the source IP address of the data packets and the corres-
ponding netmask.
Source Port/Range
Only for Protocol =
5
or
!5
Enter a source port number or a range of source port numbers.
Possible values:
• (default value): The destination port is not specified.
•
.3=< . $
: Enter a destination port.
•
.3=< . $ $
: Enter a destination port range.
DSCP/TOS Filter
(Layer 3) Select the Type of Service (TOS).
Possible values:
•
$
(default value): The type of service is ignored.
•
! 5 9$< @:
: Differentiated Services Code Point
according to RFC 3260 is used to signal the priority of IP
packets (indicated in binary format, 6 bit).
•
! 5 !3 @:
: Differentiated Services Code Point
according to RFC 3260 is used to signal the priority of IP
packets (indicated in decimal format).
•
! 5 (#3 @:
: Differentiated Services Code
Point according to RFC 3260 is used to signal the priority of
IP packets (indicated in hexadecimal format).
•
' 9$< @:
: The TOS value is specified in binary
format, e.g. 00111111.
bintec elmeg GmbH
20 Networking
elmeg hybird 120 / hybird 130 389