BinTec elmeg hybird 120, Справочное руководство

Страница: 230 / 757

Field Description
Select the internal team subscribers.
With Add, you add more internal numbers.
External Assignment Only if Assignment =
#$
Enter the number of the external subscriber.
Route and Charge As-
signment Only if Assignment =
#$
Charges for the call and assignment of an external connection
occur via the selected internal subscriber.
Automatic call acceptance in the team
You want a caller to be accepted already at call signalling and not to hear the ringing tone.
That's no problem if you're using automatic call acceptance for team calls. In this case, the
caller is automatically accepted by the system and hears an announcement or system mu-
sic-on-hold. During this time, the call is signalled to the entered team subscribers. If a sub-
scriber takes the call, the connection to the caller is established.
If a team is called, it can be defined in configuration that the call is automatically accepted,
and that the caller hears an announcement or music. The target subscriber(s) are called
during this time. After the receiver is picked up, the announcement or music is turned off
and the subscribers are connected to each other.
Possible settings for automatic call acceptance:
•
: :-
: All assigned terminals are called simultaneously. If a terminal is busy,
call waiting can be used.
•
8$
: All assigned terminals are called in the sequence of their entry in configuration.
If a terminal is engaged, the next free terminal is called. The call is signalled ca. 15
seconds per subscriber. This period can be set between 1 and 99 seconds (per team) in
the configuration. If subscribers are on the phone or logged out, there is not forwarding
time for these.
• : This call is a special case of the linear call. After all terminals are called, call
signalling begins again with the first entered terminal. The call is signaled until the caller
replaces the receiver or the call is ended by the exchange (after ca. 2 minutes).
• : The terminals are called in the order of their entry in the subscriber list. Every
terminal that has already been called is called again, until all entered terminals are called.
•
8$0 : :- " .<
: Rotating or linear is set for the team call. After
defined times have run out, all team subscribers can be called in parallel
(simultaneously). Example: A precondition is that the sum of forwarding times is larger
14 Numbering bintec elmeg GmbH
212 elmeg hybird 120 / hybird 130