BinTec elmeg hybird 120, Справочное руководство

Страница: 450 / 757

Fields in the IP Mode and Routes menu.
Field Description
IP Address Mode Select whether your device is to be assigned a static IP address
or whether it should be assigned this dynamically.
Possible values:
•
4 5 $--
(default value): Your device is automatic-
ally assigned a temporarily valid IP address from the provider.
•
3
: You enter a static IP address.
Default Route Select whether the route to this connection partner is to be
defined as the default route.
The function is enabled with
;
.
The function is enabled by default.
Create NAT Policy Specify whether Network Address Translation (NAT) is to be ac-
tivated.
The function is enabled with
;
.
The function is enabled by default.
Local IP Address Only for IP Address Mode =
3
Assign an IP address from your LAN to the PPT interface, which
is to be used as your device's internal source address.
Route Entries Only if IP Address Mode =
3
Define other routing entries for this PPTP partner.
Add new entries with Add.
•
5 $--
: IP address of the destination host or
network.
•
"-E
: Netmask for Remote IP Address If no entry is
made, your device uses a default netmask.
•
$3
: The lower the value, the higher the priority of the
route (range of values ...
)
). The default value is .
The menu Advanced Settings consists of the following fields:
22 WAN bintec elmeg GmbH
432 elmeg hybird 120 / hybird 130