BinTec elmeg hybird 120, Справочное руководство

Страница: 522 / 757

Field Description
value means that no L2TP HELLO messages are sent.
Minimum Time
between Retries Enter the minimum time (in seconds) that your device waits be-
fore resending a L2TP control packet for which it received no re-
sponse.
The wait time is dynamically extended until it reaches the Max-
imum Time between Retries. The available values are
to
))
, the default value is .
Maximum Time
between Retries Enter the maximum time (in seconds) that your device waits be-
fore resending a L2TP control packet for which it received no re-
sponse.
The available values are
,
to
))
, the default value is
+
.
Maximum Retries Enter the maximum number of times your device is to try to re-
send the L2TP control packet for which is received no response.
The available values are
,
to
))
, the default value is
)
.
Data Packets Se-
quence Numbers Select whether your device is to use sequence numbers for
data packets sent through a tunnel on the basis of this profile.
The function is enabled with
;
.
The function is disabled by default.
23.2.2 Users
A list of all configured interface L2TP partners is displayed in the VPN->L2TP->Users
menu.
23.2.2.1 New
Choose the New button to set up new L2TP partners.
23 VPN bintec elmeg GmbH
504 elmeg hybird 120 / hybird 130