BinTec elmeg hybird 120, Справочное руководство

Страница: 460 / 757

Field Description
IP Address Mode Select whether your device is to be assigned a static IP address
or whether it should be assigned this dynamically.
Possible values:
•
3
(default value): You enter a static IP address.
•
5$ 6 5 $--
: Your device dynamically assigns an
IP address to the remote terminal.
•
4 5 $--
: Your device is dynamically assigned an
IP address.
Default Route Only for IP Address Mode =
3
and
4 5 $--
Select whether the route to this connection partner is to be
defined as the default route.
The function is enabled with
;
.
The function is disabled by default.
Create NAT Policy Only for IP Address Mode =
3
and
4 5 $--
When you configure an ISDN Internet connection, specify
whether Network Address Translation (NAT) is to be activated.
The function is enabled with
;
.
The function is disabled by default.
Local IP Address Only if IP Address Mode =
3
Assign the IP address from your LAN to the ISDN interface
which is to be used as your device's internal source address.
Route Entries Only if IP Address Mode =
3
Define other routing entries for this connection partner.
•
5 $--
: IP address of the destination host or
network.
•
"-E
: Netmask for Remote IP Address If no entry is
made, your device uses a default netmask.
•
$3
: The lower the value, the higher the priority of the
route (range of values ...
)
). The default value is .
22 WAN bintec elmeg GmbH
442 elmeg hybird 120 / hybird 130