BinTec elmeg hybird 120, Справочное руководство

Страница: 255 / 757

function key, this is indicated by flashing LEDs on the function keys for the system tele-
phones set up for this. The call is transferred by pressing the corresponding function key.
This performance feature is only possible if only one call is on hold.
•
>$.:.
: You can configure a key so that when it is pressed, an agent's
post-processing time is switched on or off at a team call centre (first level), or extended
(second level).
•
"7
: You can configure a key so that by pressing it night operation is switched
on or off.
Note
To manually switch night operation off again, the authorisation class Switch sig-
nalling variants manually must be enabled.
•
5$
(only S5x0): If a parallel call to another telephone is configured,
both connections will ring when a call comes in. The call is accepted where first picked
up.
•
7=
(only S5x0): With this key, you can access second level functions.
•
! !-:$;
(only S5x0): With this key, you enable or disable the Do not Disturb
function which you have configured under Terminals->elmeg System Phones->System
Phone->Settings.
The menu Terminals->elmeg System Phones->System Phone->Keys-> Edit consists of
the following fields:
Fields in the menu Telephone
Field Description
Key name
Enter a name for the key to be used as text for the correspond-
ing key when the ID labels are printed.
Key Type Depending on the model, the telephones feature from 5 to 15
keys on which functions may be assigned over two levels. You
can reach the second layer of function keys by pressing the
keys twice. This must be done quickly. With S5x0 devices, you
can alternately use the
7=
function key. With the optional
key extensions, you have access to additional twice-assignable
function keys.
Possible values:
•
! L< $
•
! L< !
•
! L< L<. -S:3
bintec elmeg GmbH
15 Terminals
elmeg hybird 120 / hybird 130 237