BinTec elmeg hybird 120, Справочное руководство

Страница: 168 / 757

Field Description
DSL Mode Select the ADSL synchronization type.
Possible values:
•
! 8 :
(default value): The ADSL mode is auto-
matically adapted for the remote terminal.
•
! 8
:ADSL1 / G.DMT is used.
•
! 8
: ADSL2 / G.992.3 is used.
•
! 8 5:-
: ADSL2 Plus / G.992.5 is used.
•
: #
: Only for Annex A devices. The AD-
SL mode is automatically adapted to the other end with refer-
ence to G.992.3 Annex M.
•
! 8 5:- #
: Only for Annex A devices. ADSL2
Plus / G.992.3 Annex M is used.
•
! 8 # O
: Only for Annex J devices. ADSL2 Plus /
G.992.3 Annex J is used.
•
! 8N # O
: Only for Annex J devices. ADSL2 Plus /
G.992.5 Annex J is used.
•
36
: The ADSL interface is not active.
Transmit Shaping Select whether the data rate in the send direction is to be re-
duced. This is only needed in a few cases for special DSLAMs.
Possible values:
•
!=: 8 .
(default value): The data rate in
the send direction is not reduced.
•
,0 ;.-
to
0,0 ;.-
: The data rate in the
send direction is reduced to a maximum of 128,000 bps to
2,048,000 bps in defined steps.
•
-$=
:The data rate is reduced to the value entered
in Maximum Upstream Bandwidth.
The default value is
!=: 8 .
.
Maximum Upstream
Bandwidth Only for Transmit Shaping =
-$=
Enter the maximum data rate in the send direction in bits per
second.
The menu Advanced Settings consists of the following fields:
12 Physical Interfaces bintec elmeg GmbH
150 elmeg hybird 120 / hybird 130