BIG BALE Transtacker 4100, Руководство по эксплуатации и обслуживанию

Страница: 8 / 88

4.0 Safety
WARNING: Keep side Gate pins in place when
transporting on highways.
When traveling along roads the side clamps are subject to
variable and high loads. Failure or inadvertent operation of
the side clamps could cause very serious injury or damage
to others. Set controls to ‘Road Mode’
prior to road
transport ( Fig. 5 )
Failure of the hydraulic lines is covered by the load valves
attached to the clamp and lift cylinders. Road Mode should
be used during transport to prevent inadvertent operation.
The safety pins provide a necessary and useful further
safety device should there be a failure of the cylinder.
WARNING:
Take care when operating on sloping ground or when
traversing undulations at speed to prevent overturning of
the stacker. By necessity the machines have a high centre
of gravity when loaded. Caution should always be exercised
to prevent overturning and resulting injury and/or damage.
When picking up bales on sloping ground, always traverse
the slope so that the bales are picked up from the high
(right hand) side.
WARNING : If at any times you need to stop the machine
during one of its auto functions, press the E-Stop button
located by the side of your Transtacker screen
( Fig. 5 ).
Fig. 5
5