BIG BALE Transtacker 4100, Руководство по эксплуатации и обслуживанию, Страница: 46 / 88

Pickup height not correctly
set for bale size
Trigger point needs
adjusting
Rotary Sensor requires
Calibration ( Section 6.9 ).
Faulty Sensor
Faulty wiring
Tines Don’t Fully Retract
Tines Retract pressure
sensor has hit its desired
pressure
Increase Tines Retract
Trigger Pressure
Hooks Insert
(Works in
line with below
function)
Hooks Don’t Insert Power To Solenoid
Check for power supply to
solenoid, wiring loom fault
Solenoid could be faulty
Hook’s Don’t Fully Insert
Hooks Insert pressure
sensor has hit its desired
pressure
Increase Hook insert trigger
pressure
Fault with Pressure
Transducer
Once inserted, the hooks
start to drop out (down)
The Hook valve in the
selector valve
The valve is stuck opening
allowing for the pressure in
the Hook ram to drop. New
valve is needed
Pickup Lower (Works in
line with above
function)
Pickup Doesn’t Fully Lower
Pickup Rotary Sensor Angle
False Trigger
Pickup Sensor requires
Calibration ( Section 6.9 )
Trigger Pickup Lower needs
altering
Pickup Doesn’t Lower at All
Tine Retract pressure sensor
has not hit its desired
pressure
Trigger pressure set too
high. Lower trigger pressure
Faulty Pressure Transducer
– change pressure
transducer
Pickup won’t complete its
cycle
Pickup Rotary sensor angle
Pickup lower angle has not
been achieved. Re-calibrate
sensor ( Section 6.9 )
8 .0 Trouble s hooting
8 . 9 Auto Pickup Troubleshooting Continued.
Fig. 1 4 8
43