BIG BALE Transtacker 4100, Руководство по эксплуатации и обслуживанию, Страница: 4 / 88

1.0 Introduction
1.1 Description
In choosing th e B i g Bale Transtacker 4100 you have
purchased a machine of exceptional versatility.
This manual should be regarded as essential reading in the
interest of safety, efficiency and longevity of the machine.
References to R i ght and Left in this manual are taken as
viewing the machine from the rear facing in the normal
direction of travel.
1.3 Machine Identification Plate
If service parts are required it is necessary to quote the
machine serial number. This is located at the front right
hand side of the machine on top of the drawbar front
plate. It is recommended that this information be
transferred to this page on delivery of the Transtacker
4100.
Model
________________________
Serial No. ________________________
Year of Manufacture ________________________
Date of Delivery ________________________
Unladen Weight ________________________
Max Gross Weight ________________________
Max Drawbar Load ________________________
1.2 SAFETY ALERT SYMBOLS
This warning symbol appears throughout this hand book.
Attention is drawn to items or operations that could cause
danger to the operator or to persons nearby. Please read
safety messages carefully and have a full understanding of
their importance.
Always abide by the requirements.
WARNING: Warnings call attention to instructions, which
need to be followed precisely to avoid a hazardous
situation.
CAUTION:
Cautions call attention to instructions, which
must be followed precisely to avoid damaging the product,
process or surroundings.
Fig. 1
1.4 Intended Use of the Machine
The Big Bale Transtacker is designed to assemble
various sized big bales, 2.4m (8') long, into completed
stacks and erect them into a tower.
The various sizes of bales must have a width or depth
which can, (when arranged side by side in some multiple),
form a rectangle that is 2.4m(8') square. Bale length is
permitted to vary considerably but to tie layers, 2.4m(8") ±
0.1 is preferred.
The machine will also recover previously erected towers
and re-erect them in a new location.
The bales can be of various straws and hays generally
found in agricultural use.
The machine is generally towed with an agricultural
tractor recommended minimum of 6 Tonnes,1
50 HP.
1