BIG BALE Transtacker 4100 Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 88

BIG BALE Transtacker 4100 Скачать руководство пользователя страница 7

4.0 Safety

4.1

Safety in Operation & Maintenance

Operation of the machine without paying heed to fitting and
use of guards or to the safety notices renders you liable to
prosecution.

This applies even if you are the injured party.

Your attention is drawn to the safety notices (decals) that are
displayed on the machine. These notices should be kept
clean and intact so they are legible at all times.

If any of the notices become detached or defaced, they must
be replaced immediately.

These are available from your local Big Bale Transtacker
agent.

They are included in the spare parts list and examples to aid
identification are reproduced on the following pages.

WARNING: Read Owners Manual

This manual contains safety information and
operation and maintenance instructions for your Big Bale
Transtacker. The operator must ensure that he/she has fully
read and understood this manual before operating the
machine.

WARNING: Before Commencing Any Repairs/

Maintenance

Shut  off  engine,  remove  ignition  key,  and  unplug
electric  control  box  before  performing  any  maintenance
or  repair work.

WARNING:

Keep persons away from the machine during

operation. There is a danger from falling bales and moving
machinery.

WARNING:

When the Guide Bar is out there is a danger

that it may be overlooked by the operator. Ensure
Transtacker is in Road Mode when traveling at high speeds.

WARNING:

Do not raise the platform of the Transtacker

while under high voltage power lines. Some parts of the
machine can exceed 5.2m high and cause electrocution and/
or fire.

4

«
...
5
6
7
8
9
...
»

Содержание Transtacker 4100

























































































Отзывы:

Нет отзывов