
EN
42
Problem
Possible cause
Solution
The beer
fl
ows
out of the tap
too slowly.
Is the CO
2
cartridge empty?
Replace the CO
2
cartridge (see the
“Preparation” chapter – “Inserting /
Replacing the CO
2
Cartridge”).
Is the pressure too low?
Set the pressure slightly higher using
the pressure regulator.
Is the beer being squeezed
out of the tap line?
Fully open the tap handle.
The cooling
container is
heavily iced up
(Slight icing is
normal.).
Has the device been set up
in a damp environment?
Set up the device in a drier environment.
Is the ambient temperature
too low?
Make sure there is a su
ffi
ciently warm
ambient temperature.
The beer keg
can only be
tapped into
with a great
deal of e
ff
ort.
Was the tapping sword
moistened prior to tapping?
Moisten the tapping sword by holding it
under cold, clear water.
Disposal
Dispose of the packaging material in an environmentally friendly manner so
that it can be recycled. The empty beer kegs and CO
2
cartridges should also be
disposed of in an environmentally friendly way.
This device is governed by the European Directive 2012/19/EU on waste elec-
trical and electronic equipment (WEEE). Do not dispose of the device as normal
domestic waste, but rather in an environmentally friendly manner via an o
ffi
cially
approved waste disposal company.
All rights reserved.
05581_05578_Inlay_DE-EN-FR-NL_A5_V3.indb 42
05581_05578_Inlay_DE-EN-FR-NL_A5_V3.indb 42
27.10.2020 11:04:32
27.10.2020 11:04:32