EN
40
Problem
Possible cause
Solution
No beer can
be drawn.
Is the beer keg empty?
Check the beer keg and insert a new
one if necessary (see the “Preparation”
chapter – “Tapping Into and Connecting
the Beer Keg”).
Is the CO
2
cartridge (
26
)
empty?
Replace the CO
2
cartridge (see the
“Preparation” chapter – “Inserting /
Replacing the CO
2
Cartridge”).
Was the CO
2
cartridge not
pierced correctly?
Take out the cartridge and insert it
again. If it still cannot be pierced, the
tapping tip (
31
) needs to be replaced
(see the “Maintenance” chapter –
“Replacing the Sealing Ring of the CO
2
Line and Tapping Tip”).
Is the beer keg connected
correctly?
Check the connections to the beer pump
and correct them if necessary (see the
“Preparation” chapter – “Tapping Into
and Connecting the Beer Keg”).
Do the lines have leaks?
Check the sealing ring between the
tapping sword (
22
) and valve unit (
20
)
and in the mount for the cartridge
sleeve (
16
) and replace it if necessary
(see the “Maintenance” chapter –
“Replacing the Sealing Ring of the CO
2
Line and Tapping Tip” and “Replac-
ing the Sealing Ring of the Tapping
Sword”).
CO is
escaping.
Has the cartridge
sleeve (
16
) been fully
tightened?
Screw the cartridge sleeve as far as it
will go on the mount in the lid.
Are the valve of the CO
2
line (
19
) and the corre-
sponding adapter (
21
)
plugged together correctly?
Press the valve of the CO
2
line as far
as it will go onto the adapter. It must
engage audibly!
Are the screw connections
on the CO
2
line (
19
) loose?
Tighten the screw connections.
Do the lines have leaks?
Check the sealing ring between the
tapping sword (
22
) and valve unit (
20
)
and in the mount for the cartridge
sleeve (
16
) and replace it if necessary
(see the “Maintenance” chapter –
“Replacing the Sealing Ring of the CO
2
Line and Tapping Tip” and “Replac-
ing the Sealing Ring of the Tapping
Sword”).
05581_05578_Inlay_DE-EN-FR-NL_A5_V3.indb 40
05581_05578_Inlay_DE-EN-FR-NL_A5_V3.indb 40
27.10.2020 11:04:32
27.10.2020 11:04:32