Berger Lahr WDP3-01X, Руководство пользователя

Страница: 95 / 114

The following accessories may be ordered separately (see fig. 6-1):
Item no. Designation Reference
1 3-phase stepping motor with or without encoder See chapter 6.1 and
3-phase stepping motor drives
catalogue
2 MP 927 Interbus-S interface adapter See On-line Command
Processing via Interbus-S
documentation
3 Fan for WDP3-014 See chapter 6.2.1
4 Mains filter See chapter 6.2.2
5 MP 923 interface converter RS 232/RS 485 See chapter 6.2.3
6 MP 924 interface distributor RS 485 See chapter 6.2.4
7 Additional bleed resistor See chapter 6.2.5
8 Profibus-DP bus terminal or adapter –
9 Set of connectors (all sub-D connectors) –
Non-terminated cables
See sales documentation
10 Cable for encoder
11 Motor cable 3 x 1.5 mm and 2 x 1.0 mm
Motor cable 3 x 2.5 mm and 2 x 1.5 mm
12 Signal cable for signal connection
13 Signal cable for adapter slot OPT.1
14 Signal cable (encoder) for adapter slot OPT.2
15 Signal cable (pulse, direction) for adapter slot OPT.2
Ready-made cables
16 ANOZ/customer signal cable, terminated on device end
17 Interbus-S/MP 927 signal cable, terminated on both ends
18 RS 232/PC signal cable, terminated on both ends
19 RS 422 IN/customer signal cable, terminated on device end
20 RS 485 LS/MP 923 signal cable, terminated on both ends
21 RS 485 LS/MP 924 signal cable, terminated on both ends
22 Signal connection/customer signal cable, terminated on
device end
Non-terminated cables are available in the following lengths:
5 m 10 m 15 m 20 m 25 m 30 m 50 m 75 m 100 m 200 m
Ready-made cables are available in the following lengths:
1.5 m 2 m 3 m 5 m
NOTE
Refer to the sales documentation of the WDP3-01X positioning controller
for the accessory order numbers.
Appendix
WDP3-01X Ident. no.: 00441109760 6-3