Berger Lahr WDP3-01X, Руководство пользователя

Страница: 32 / 114

2-8 WDP3-01X Ident-no.: 00441109760
Installation
2.4.2 Motor connection
1. Release the two screws and remove the connector (fig. 2-7) from
the unit.
2. Preparation the motor cable (fig. 2-6), an mount wire end ferrules
on the device end of the motor cable..
3. Fasten the litz wires with screws.
4. Fasten the connector to the front panel (item 24).
Preparation the motor cable
Fig. 2-6 Preparing the motor cable
Motor connection
Fig. 2-7 Motor connection
NOTE
An additional bleed resistor can be used for dissipating a higher amount
of braking energy (see chapter 6.2.5).
NOTE
The sense of rotation of the motor can be inverted by interchanging two
motor leads. In this case, also the limit switch inputs LIMP and LIMN as
well as the A and A signals of any rotation monitoring encoder connec-
ted must be interchanged.
20 mm 25 mm 70 mm
55 mm
ye/gn
bk
bl
bn
60 mm
65 mm
U
V
W
24
bn
bl
bk
ye/gn