Beer Grill AG
Beer Grill GmbH
Allmendstrasse 7
Tel. +41 56 618 7800
Körnerstrasse 14 a
Tel. +49 71 61 659 876
CH
– 5612 Villmergen,
Switzerland
Fax +41 56 618 7849
D
– 79539 Lörrach,
Germany
Fax +49 71 61 659 879
www.beergrill.com
Assembly-Programming-Instructions_Cold-Rack_e_05-10-2018
Page 4
1
Installation and commissioning
1.1 Acceptance
After a final inspection, our appliances are safely packaged in order to arrive in good
condition. Nevertheless, we ask you to inspect the appliances for transport damage when
they are received.
Should you find any damage, please note this on the shipper's papers and on your form and
have the damage confirmed. If the damage does not appear until after unpacking, you must
inform us immediately of the damage in writing. It is advisable to inform your supplier in
advance by telephone.
After inspection, we recommend packing the appliances again to prevent damage
during any intermediate storage or further transport.
The transport is at your own risk; if you do not report transport damage in due time, your
claim for settlement will expire.
1.2 Place of installation
The refrigerated appliances should be installed in such a way that draughts are avoided or
kept to a minimum. Refrigerated appliances should not be installed near doors or in areas
where they are exposed to considerable air circulation, e.g. outlet openings of air
conditioning, ventilation and heating systems.
When designing the ventilation systems, the air velocity and air flow direction above the
refrigerated appliance should be taken into account. Special attention should be paid to the
outlet openings of warm air heating systems.
Heat radiation and lighting
In order to minimise the adverse effects of radiant heat, it is important to ensure that the
refrigerated appliances are not exposed to solar radiation, air distributors and ducts,
uninsulated roofs or walls heated by solar radiation or other sources of heat. Heat radiation
entering the refrigerated appliance leads to greater operating costs and poor performance.
Spotlights or other concentrated lighting fixtures should not be directed into the appliance.
Avoid steam-generating appliances in the vicinity. This can lead to heavy icing of the
evaporator, thus reducing its capacity.
For installation, choose a room that is well ventilated and low in dust. The function of the
refrigerated appliance is only assured if a relative humidity of max. 65 % and a room
temperature of 26 °C are not constantly exceeded.
Correct installation and trouble-free operation are prerequisite for commissioning
the refrigerated cabinet. The installation must comply with local refrigeration,
electrical, safety and hygiene regulations.
i