Baxi Senertec Dachs Pro 20 ST, Руководство по сборке и эксплуатации

Страница: 69 / 118

14/4798.495.002 Installation | 69
Dachs Pro 20 ST
The exhaust gas system consists of the following components:
●
Exhaust catalyser
●
Exhaust gas heat exchanger
●
Exhaust gas silencer
The exhaust gas silencer enables considerable noise reduction inside the unit under the present room conditions. The
exhaust gas heat exchanger cools the exhaust gas from the CHP to an outlet temperature of 190 °C.
A condensate trap has to be integrated into the exhaust gas system outside the CHP.
Exhaust gas system information:
If the building is not equipped with a lightning arrester, equipotential bonding has to be attached to the bottom
of the chimney.
i
Attention! Risk of burns:
The exhaust gas system has to be insulated with suitable thermal
insulation to prevent dangers of burning.
Attention! Risk of poisoning:
To prevent the risk of poisoning due to escaping exhaust gas, the
siphon of the condensate trap has to be fi lled with water.
For exhaust gas evacuation of the Dachs Pro 20 ST, a type-approved chimney and/or an exhaust gas duct
must
be used.
In cooperation with an exhaust pipe manufacturer, SenerTec has specifi ed an appropriate pressure-tight and temperature-
resistant exhaust gas system
designed for the Dachs Pro 20 ST
. Suffi cient experience is only available for the specifi ed
exhaust gas system. For this reason, only this exhaust gas system is approved for the system test phase. Processing and
delivery is managed directly by the manufacturer.
Regarding project planning and order processing, please contact:
Company: Raab GmbH
Contact: Dirk Werner
Address: Gladbacher Feld 5
Post code, city: D - 56566 Neuwied
Phone: +49 (0) 160 - 88 49 779
E-mail:: dirk.werner@raab-gruppe.de
Internet: www.raab-gruppe.de
6.9.1 Exhaust gas system
Attention! Danger:
Supply air apertures must not be obstructed. Closed supply air apertures may lead to incomplete combustion
as well as to the formation of carbon monoxide. This may lead to poisoning.