Baxi Senertec Dachs Pro 20 ST, Руководство по сборке и эксплуатации

Страница: 53 / 118

14/4798.495.002 Installation | 53
Dachs Pro 20 ST
Installation and assembly at the SE940 buff er vessel
►
Both SE940 buff er vessels are to be installed under
consideration of the installation surface and clearances.
►
Both buff er vessels have to be properly aligned.
►
The provided sensors F1, F2, F3 and F4 are to be assembled at
the sensor lugs of the buff er vessels according to the hydraulic
diagram (for positioning, refer to the fi gures).
►
Assemble one of the provided earthing clamps
9
at the
air vent
5
of each buff er vessel for later connection of the
equipotential bonding line.
The installation position at the air vent is not coloured.
Equipotential bonding connection diameter: 1×6 mm²
►
Assemble one of the provided reducer brackets
10
and one
automatic vent
11
at the air vent
5
of each buff er vessel and
seal it.
Note:
The SE940 buff er vessel is delivered with
assembled buff er insulation. It has to be removed
after transport to the installation location.
i
2“ TUBE
2“ TUBE
2“ TUBE
2“ TUBE
20-30 mm colourless!!
Tube end secured
at storage cover
Con
tr
oller PCB 1 ¼“
Con
tr
oller PCB 1 ¼“
Con
tr
oller PCB 1 ¼“
Con
tr
oller PCB 1 ¼“
Con
troller PCB ¾“
1 Rp 3/4" threaded connection (fi lling/
discharge)
2 Rp 1 1/4" threaded connection (open)
3 Locking straps for sensor elements
4 Rp 1 1/4" threaded connection (open)
5 Ventilation and equipotential bonding
connection
6 Rp 1 1/4" threaded connection (open)
7 G 1 1/2" threaded connection (closed,
reserve)
8 Rp 1 1/4" threaded connection (open)
1178 mm 600 mm
3368 mm
2200 mm
600 mm
powered by Volkswagen
1750 mm
990 mm
2200 mm
2132 mm
1
2
2
4
4
7
7
8
8
6
6
5
5
3
F1
F2
1
SE940
2
SE940
F3
F4
Attention:
Ensure that the sensors are fi rmly
attached to the buff er vessel.
!
11
10
9
Fig. 37: Connections at the SE940 buff er vessel (without insulation on the left, with insulation visible connections on the right)
Fig. 38: Figure of 2 × SE940 buff er vessels
Fig. 39: Connections at the SE940 air vent