Baxi Senertec Dachs Pro 20 ST, Руководство по сборке и эксплуатации

Страница: 45 / 118

14/4798.495.002 Prior to installation | 45
Dachs Pro 20 ST
5.4 Transport
If possible, all unit components should be transported to the installation location while still in their packaging. Use suitable
transportation aids for heavy loads.
Attention:
Check the packaging for transportation damage.
!
5.4.1 Access to the installation location
During project planning, it has to be ensured that the access to the installation location is guaranteed for all components of
the unit.
Please also note the following general framework conditions:
●
The components have high lifting loads.
●
For the CHP unit of the Dachs Pro 20 ST, access openings with a width of at least 90 cm are required at the
installation location.
Note:
Please also note the swivel dimensions for access to the installation location.
i
●
The SE940 buffer vessel is pre-assembled before delivery.
●
Lifting devices are to be provided for transportation.
Note:
Lifting devices increase the space required during transportation.
i
Reference:
Please observe the instructions and information in the iav Documentation of VW on
the EcoBlue 2.0 (Generation 1.2) in particular.
Reference:
Please observe the instructions and information in the iav Documentation of VW on the EcoBlue 2.0 (Generation
1.2) -
Chapter 4 Transport
in particular. The option of dismantled transport is also described there.
Information on the following points is to be obtained in advance:
●
Dimensions and weights.
●
Required transportation aids.
● Required special tools.
●
Scope of delivery and packaging units.
●
Required safety measures.
5.4.2 CHP unit transport