Baxi Senertec Dachs Pro 20 ST, Руководство по сборке и эксплуатации

Страница: 9 / 118

14/4798.495.002 Introduction | 9
Dachs Pro 20 ST
1.4 Abbreviations
1.5 Responsibilities
DVGW Deutscher Verein des Gas- und Wasserfaches
[German association of the gas and water industry]
AC Alternating current
FeuVO Feuerungsverordnung
[German ordinance on firing installations]
Oh Operating hours
GS Gas supplier CHP Combined heat and power generation
(here also: CHP unit)
CHP Combined Heat and Power CAN Controller Area Network
AEGS Air-exhaust gas system CO Carbon monoxide
STB Safety temperature limiter DC Direct current
TCR Technical connection requirements dB(A) Sound pressure level with A-weighting
TI air Technical instructions on air pollution control EGS Electronic gas safety controller
TRGI Technical regulation for gas installations EVU Energy provider
DNO Distribution network operator IP International Protection
F1-F7 Sensors F1 - F7 KFE Boiler filling and discharge valve
PWM Pulse width modulation (pump signal) PSI Buffer vessel interface
1.5.1 Responsibilities of the installer
Disassembled transport as well as assembly, commissioning, service, maintenance and repair of the Dachs Pro 20 ST may
only be carried out by authorised and certified specialist staff. Product training carried out by SenerTec or by a training
institution commissioned by SenerTec is a minimum requirement. All work on the electrical equipment may only be carried
out by trained electricians. Please also note the following:
● Before commencing any work, carefully read all provided instructions.
●
During assembly and connection of the unit, adhere to the applicable regulations and standards.
●
Check the unit prior to commissioning.
●
Instruct the operator on how to operate the unit.
●
Inform the operator about the necessity of regular maintenance and the consequences of any non-observance.
●
Submit all documents supplied to the operator.
Reference:
Please observe the requirements and contents of the iav Documentation of VW in particular.
Attention:
Initial commissioning may only be implemented by the SenerTec customer service in cooperation with the VW
customer service.
!