Baxi Senertec Dachs Pro 20 ST, Руководство по сборке и эксплуатации

Страница: 104 / 118

14/4798.495.002 104 | Settings
Dachs Pro 20 ST
9 Settings
9.1 List of parameters
Reference:
For the full list of parameters regarding the MSR Pro 20 ST, please refer to:
● MSR Pro 20 ST operation and configuration instructions , art. no. 4798.494.xxx.
For the detailed description of the CHP unit control panel, please refer to the iav documentation of VW.
● EcoBlue 2.0 (Generation 1.2) installation manual for Dachs Pro 20 ST , art. no. 4798.522.xxx
●
EcoBlue 2.0 (Generation 1.2) user manual for Dachs Pro 20 ST , art. no. 4798.530.xxx.
For a selection of the parameters required for commissioning and their application, please refer to
chapter 7.6 “Commissioning settings” in this manual.
Reference:
For a detailed description of the unit parameter settings, refer to:
● MSR Pro 20 ST operation and configuration instructions , art. no. 4798.494.xxx.
● EcoBlue 2.0 (Generation 1.2) installation manual for Dachs Pro 20 ST , art. no. 4798.522.xxx
● EcoBlue 2.0 (Generation 1.2) user manual for Dachs Pro 20 ST , art. no. 4798.530.xxx.
Note:
The displays and access rights for changing parameters depend on the selected user
level (operator, operator advanced level, service level).
i
During the system test phase, the operating data can only be retrieved via the display of the MSR Pro 20 ST controller.
After the software update, operating data can also be retrieved via
●
the optical interface (laptop with DachsKOM) or
●
the GSM modem (Da Dachs Portal).
9.2 Setting parameters
9.3 Reading out operating data