Baxi Senertec Dachs Pro 20 ST, Руководство по сборке и эксплуатации

Страница: 15 / 118

14/4798.495.002 Safety | 15
Dachs Pro 20 ST
2.1.3 Gas connection
The stipulations of DVFG-TRF 2012 are to be
strictly adhered to.
A gas shut-off valve with thermal shut-off unit
(TSOU) must be installed.
Attention! Danger:
The gas line is a safety-relevant
component and may only
be mounted by authorised
specialist staff .
Danger
Risk of explosion caused by room air saturated with gas.
Danger of suff ocation caused by under-saturation of
breathing air.
Severe bodily harm or death may be the consequence.
• Immediately deactivate the unit as soon as you notice the
smell of gas.
• Avoid open fl ames, do not smoke, do not operate any
electrical switches or contacts.
• Interrupt the gas supply.
• Ensure fresh air supply.
• Check the connections and lines for leakage.
• Immediately repair any leakage.
• Notify the gas supplier if the leakage is upstream of the gas
meter.
In case of non-controllable gas leakage, leave the
hazardous area and notify the fi re services.
2.2 Intended use
Any other functions or applications beyond this are regarded as not intended. SenerTec GmbH shall not assume any liability
for any damage resulting from this unintended use. The operator shall bear the entire risk.
Attention! Danger:
The unit may only be operated according to its specifi ed intended use.
During system testing, the Dachs Pro 20 ST may only be operated with specifi ed modules and approved system
technology.
Any unintended use may lead to personal injury or damage to the machine.
The following situations are regarded as incorrect operation:
●
Operation with system technology not recommended by the manufacturer.
●
Operation with fuels other than those specifi ed and approved.
●
Operation with machine settings changed by the operator.
●
Operation with supply connections changed by the operator.
●
Operations under ambient conditions other than those approved.
The unit may only be operated according to its intended use as described in the present document.
Combined heat and power generation units (CHP), also referred to as micro CHP, are systems or units that work according
to the principle of combined heat and power generation to simultaneously generate electricity and heat. The Dachs Pro 20
ST works according to this principle. However, it is designed for decentralised utilisation and application of the generated
energies inside the building.