Baroness LM2700, Руководство по обслуживанию

Страница: 71 / 325

In the event of loss of mobility due to engine
trouble or the like of, movement is possible
through towing or hand driving.
Take the shortest route when towing or hand
driving the machine.
Transport the machine on a trailer if you have to
transport it a long way.
For the towing method, see the Owner
’
s
manual.
Neutral
If the machine goes forward or in reverse
without pressing on the forward/reverse pedals,
the neutral is not working. Adjust accordingly.
Refer to the Owner
’
s manual for adjustment of
the neutral.
Depressurization
Be sure to depressurize the hydraulic system
before inspecting or repairing it.
When performing depressurization, move the
machine to level surface.
Apply the parking brake, and then lower the
operating machine.
Then, stop the engine and remove the key.
To depressurize the hydraulic circuit, set the
traveling pedal and all the drives of the
operating machine to the neutral position.
To depressurize the steering circuit, turn the
steering wheel side to side.
Hydraulic circuit failure
The hydraulic traveling circuit of this equipment
is made up of a closed circuit.
In the event of failure of the hydraulic equipment
of the hydraulic circuit, debris and contaminant
from the faulty hydraulic equipment will circulate
to every part of the circuit.
Since this contaminant causes damage to other
hydraulic equipment, such debris and
contaminant must be removed to prevent further
failure of other hydraulic equipment.
In the event that failure of hydraulic equipment is
found in the hydraulic circuit, remove hydraulic
hoses and piping of the whole hydraulic circuit
and clean them well with kerosene.
Drain all the hydraulic oil from hydraulic tank
and hydraulic equipment other than the
hydraulic hoses and piping and clean them well.
We recommend to replace the hydraulic oil,
hydraulic oil filter and defective hydraulic
equipment with new ones.
Hy
draulic system
LM2700
Hydraulic system
Page 5-17 General instructions