Baroness LM2700, Руководство по обслуживанию

Страница: 230 / 325

Caution
This operation should be performed by two
people since the hood is heavy.
Remove the U nuts and washers, and then
remove the hood.
5
2
1
3
4
6f9ax9-003
Removal of Hood_003
1 Bolt
2 Washer
3 U nut
4 Frame
5 Hood
The left and right handles and hood
stoppers are tightened together.
Remove the screws, spring washers, and
nuts, and then remove the handles and
hood stoppers.
5
1
2
6
7
3
4
2
1
6f9ax9-004
Removal of Hood_004
3.
4.
1 Screw
2 Handle
3 Spring washer
4 Nut
5 Hood
6 Right hood stopper
7 Left hood stopper
Follow the steps below to remove the
rubber hook mounting brackets and rubber
hook receivers.
Remove spring washers B and bolts B
from the rubber hook mounting brackets,
and then remove the rubber hook
receivers.
Remove bolts A, washers, spring
washers, and nuts from the hood, and
then remove the rubber hook mounting
brackets.
Follow the same steps to remove them
from the right side.
9
1
5
6
4
3 2
2
3
4
7
8
6f9ax9-005
Removal of Hood_005
1 Bolt A
2 Bolt B
3 Spring washer B
4 Rubber hook receiver
5 Rubber hook mounting bracket
6 Washer
7 Spring washer
8 Nut
9 Hood
5.
[1]
[2]
[3]
LM2700
Main body
Page 7-36 Removal and installation of each section