Baroness LM2700, Руководство по обслуживанию

Страница: 206 / 325

Adjustment of Parking Brake
Danger Danger
Make sure that the brake wire is not cracked
or damaged.
Danger Danger
Make sure that the brake is effective on
slopes and that it is not applied any longer
when you release it.
Adjust the parking brake system whenever
there is any abnormality.
Important
If the brake becomes less effective due to
larger clearance between the brake disc and
the pad, adjust the clearance. "RT
mechanical brake manual" (Page 10-12)
Reference
The wire is used for fine adjustments.
Adjust the parking brake system by the
adjustment bolt.
1
nfzln9-004
Adjustment of Parking Brake_001
1 Adjustment bolt (on brake disc side)
Follow the steps below to adjust the parking
brake.
Check position of the notch of the parking
brake.
Depress the brake pedal firmly, and then
pull the parking brake lever to engage the
latch on the notch.
1.
[1]
[2]
Make adjustment with the adjustment bolt
so as to locate position of the arrow at 5
to 6 notches from the bottom.
3
2
1
ulabms-005
Adjustment of Parking Brake_002
1 Brake pedal
2 Notch
3 Latch
Traveling rod
Adjustment of Traveling Rod
The return of the pedal neutral rod
compression spring may become insufficient
due to the usage frequency of the traveling
pedal.
Inspect them and, if necessary, implement
adjustment etc.
Remove the right step cover. (See
"Removal of Step Cover" (Page 7-43) .)
Remove the right tank cover. (See
"Removal of Right Tank Cover" (Page
7-39) .)
Follow the steps below to adjust the
traveling pedal.
Loosen the nut A at the both ends of the
forward screw rod.
Rotate the forward screw rod to position
the screw rod mounting part facing
upward (direction of the arrow).
Tighten nut A at the both ends to secure
it.
Loosen nut B of the stopper adjustment
bolt for forward travel to screw in the
stopper adjustment bolt for forward travel
all the way.
[3]
1.
2.
3.
[1]
[2]
[3]
[4]
LM2700
Main body
Page 7-12 Adjustment