Baroness LM2700, Руководство по обслуживанию

Страница: 61 / 325

Steering cylinder
This is located between the rear wheels. According to the control valve that is activated depending
on the steering operation, the flow of the fluid from the hydraulic pump is changed to steer the
vehicle to the left or right.
Gear pump (for radiator cooling)
This converts the mechanical energy (rotation motion) of the engine to fluid energy by using two
gears.
This is located to the rear left of the engine.
Cartridge filter
This removes dirt or dust in the outgoing fluid.
This fulfills an essential role since elements that could cause major problems may be circulated if
there was no filter.
This is located behind the left front wheel.
Suction filter
Installed at the suction side of the pump, this fulfills the major role of preventing the oil from being
contaminated with impurities.
This is located in the hydraulic tank.
Filler neck breather
While hydraulic mechanisms are functioning, the oil level is regularly raised and lowered.
In addition, due to atmospheric pressure fluctuations as well as the temperature, air is flowing in
and out of the hydraulic tank.
Therefore, the vent at the top of the hydraulic tank has an air breather so fresh air can flow in.
Orbitrol
In a fully hydraulic power steering unit, switching of the internal valve depending on the rotational
input from the steering wheel causes oil from the hydraulic pump to be fed to the steering cylinder.
This is located at the center, inside the front cover.
Solenoid valve (V4209)
This activates the electro-magnetic valve by turning the main switch "ON" or "OFF" and controls
the fluid energy to the radiator. 13.
14.
15.
16.
17.
18.
19.
Hy
draulic system
LM2700
Hydraulic system
Page 5-7 Specifications