Baroness LM2700, Руководство по обслуживанию

Страница: 177 / 325

Glow (thermo-start)
When the ignition key is kept in the "GLOW"
position, the glow plug is generating heat and
the thermo-start lamp is turned on.
The lamp turns off at the specified time.
However, the lamp turning off is not related to
the glow plug generating heat, and the plug is
kept heated as long as the key is in "GLOW"
position even after the lamp is turned off.
The glow lamp will stay illuminated for five
seconds.
The glow plug is located at engine head of
each cylinder and is connected by the plate.
The electrical circuit is grounding of the
engine block.
OFF
ON
GLOW
START
6raejy-001
Glow (thermo-start)_001
￭
START
The engine starts by rotating the starter the
magnet switch of which is energized with the
key at "START" position.
The starter is connected via three safety
switches.
The circuit is designed so as not to rotate the
starter without operating the safety switch.
OFF
ON
GLOW
START
pff35r-001
START_001
Pilot Lamps
Status of charge of the engine, glow, and oil
pressure is displayed with illumination of the
lamps.
1
1
2
2
3 3
1 2 3
tjy2ah-001
Pilot Lamps_001
1 Charge
2 Thermo-start
3 Engine Oil Pressure
￭
Elec
trical sy
stem
LM2700
Electrical system
Page 6-29 Electrical components