Baroness LM2700, Руководство по обслуживанию

Страница: 192 / 325

Firmly secure the negative cable to the
negative terminal.
3
1
2
4jes59-004
Replacement of Battery_003
1 (+) Cable
2 (+) Terminal
3 (-) Terminal
Battery Charge
When charging the battery with the battery
charger, follow the correct steps according to
the handling instructions attached to the
battery charger.
Danger Danger
Do not charge the battery near open flames
or in a poorly ventilated area. Keep the
battery away from lit cigarettes and other
open flames.
Failure to observe these precautions could
cause a fire or explosion.
Do not connect the charge clip to the battery
nor remove it while the power of the battery
charger is ON.
Failure to observe these precautions could
cause a fire or explosion.
If the battery charger has a changeover
switch for voltage, set the battery voltage for
charge.
If the voltage for charge is wrong, it may
cause overheating or ignition of the battery
charger or explosion of the battery.
[4]
Warning
Charging the battery mounted on the vehicle
may cause ignition, explosion, or damage on
the vehicle or equipment.
If there is no way other than to charge the
battery mounted on the vehicle, remove the
minus cable terminal on the vehicle side,
which is connected to the battery.
When connecting to the battery charger,
firmly connect the plus and minus charge clip
to the plus and minus terminals of the battery,
respectively.
If they are connected reversely or loosely, it
may cause ignition, explosion, failure of the
battery charger, or damage on the vehicle or
equipment due to the polarity inversion of the
battery.
Set the charging current to 1/10 or less than
the rating capacity of battery. In the case of
fast charging, set it to that rating capacity or
less.
If the charging current is too large, it may
cause ignition or explosion due to electrolyte
leaks or liquid shortage.
Do not mount the battery on the vehicle and
wait for 30 minutes after charging.
Failure to observe these precautions could
cause a fire or explosion.
LM2700
Electrical system
Page 6-44 General inspection and repair