Baroness LM2700, Руководство по обслуживанию

Страница: 289 / 325

Remove the strop rings, bearings and
collar of part B.
2
5
4
2
B
A
1
3
2
t7ajai-005
Groomer Assy_005
1 Groomer case
2 Stop ring
3 Oil seal
4 Bearing
5 Collar
Remove strip ring A from the spline shaft.
Pull out the spline shaft in the direction of
the arrow.
Remove stop ring B.
Remove the bearing.
1
6
3
5
2
4
t7ajai-006
Groomer Assy_006
1 Groomer case
2 Stop ring A
3 18-tooth gear
4 Spline shaft
5 Stop ring B
6 Bearing
[8]
[9]
[10]
[11]
[12]
Follow the steps below to disassemble the
groomer housing.
Remove the bolt, spring washer, and
washer.
Remove the groomer housing.
Remove the stop rings and oil seals.
Remove the bearing and collar.
Remove the nipple.
4
5
1
6
8
7
9
3
2
t7ajai-007
Groomer Assy_007
1 Groomer housing
2 Stop ring
3 Oil seal
4 Bearing
5 Collar
6 Washer
7 Spring washer
8 Bolt
9 Nipple
Follow the steps below to disassemble the
groomer shaft Assy.
Remove the left and right collars.
Remove the left and right dust-proof
covers.
Remove the left nut (double).
Remove the collar and groomer blades in
order.
5.
[1]
[2]
[3]
[4]
[5]
6.
[1]
[2]
[3]
[4]
Op
erating
Machin
e an
d
Mower Units
LM2700
Operating Machine and Mower Units
Page 8-41 Inspection and repair of each section