Baroness LM2700, Руководство по обслуживанию

Страница: 287 / 325

Groomer Assy
Note:
Depending on the specifications, this function
may not be available.
Wear of bearings due to frequent use and/or
damage of bearings etc. caused by invasion of
water may prevent smooth rotation of the
groomer.
Inspect and replace the parts such as the oil
seal or bearings.
Make sure that there is no change in shape,
breakage, etc. on the groomer blades.
Make sure that the groomer shaft is not bent
nor worn.
Make sure that there is no crack on the
groomer case, groomer cover, nor groomer
housing.
Make sure that the intermediate shaft of the
groomer cover has no play.
Make sure that the bearings and shaft
receptacle of the groomer case have no
play.
Make sure that the shifter receptacle of the
groomer case has no play.
Make sure that the bearings receptacle of
the groomer housing has no play.
Danger Danger
The reel cutter (cutting cylinder), bed knife
(bottom blade), and groomer blades are all
edged tools.
Handle them carefully, since they could cut
your hands and feet.
Caution
See the list in "Tightening torques" (Page
3-5) .
Note that the Baroness product warranty may
not apply to defects caused by incorrect or
overtorque tightening etc.
Remove the groomer Assy. (See "Removal
of Groomer Assy" (Page 8-23) .)
･
･
･
･
･
･
･
1.
Follow the steps below to remove the
groomer cover from the groomer case.
Remove bolt A, the seal washer, spring,
and steel ball.
Pull out the clutch lever in the direction of
the arrow (white).
Remove eight bolts B and spring washers.
Tap two parts of the arrow (black)
alternatively with a wood hammer etc. to
remove the groomer cover.
9,10
1
5,6,7,8
3,4
2
t7ajai-001
Groomer Assy_001
1 Groomer cover
2 Groomer case
3 Clutch lever
4 O-ring
5 Bolt A
6 Seal washer
7 Spring
8 Steel ball
9 Bolt B
10 Spring washer
2.
[1]
[2]
[3]
[4]
Op
erating
Machin
e an
d
Mower Units
LM2700
Operating Machine and Mower Units
Page 8-39 Inspection and repair of each section