Barbecook SMOKER XL, Руководство пользователя

Страница: 8 / 138

8 www.barbecook.com
8.5 Removing rust from the body
If you detect rust on the interior or exterior of the body, proceed
as follows to remove it:
8.6 Storing the appliance
Store the appliance in a dry place (indoors, under a shelter...)
after each use.
2
Make sure the appliance is completely dry before you
store it. This prevents formation of rust.
8.7 Maintaining enamel, stainless steel,
chrome and powder coated parts
The appliance is composed of enamelled, stainless steel,
chromed and powder coated parts. Each material has to be
maintained differently:
1
Damages caused by not following these instructions are
regarded as inadequate maintenance and are not
covered by the warranty.
Below the exploded view of your appliance (second part of the
manual), you find a list with all parts of which the appliance is
composed. This list includes a symbol that specifies the material
of each part, so you can use it to check how you have to maintain
a particular part. The parts list uses the following symbols:
8.8 Ordering spare parts
Parts that are directly exposed to fire or intense heat have to be
replaced from time to time. To order a spare part:
1
Look up the reference number of the part you need. You find
a list of all reference numbers below the exploded views in
the second part of this manual and on www.barbecook.com .
2
If you registered your appliance online, you will
automatically be guided to the correct list.
2
Order the spare part at your point of sale. You can order
parts both under and outside warranty.
9 WARRANTY
9.1 Covered
Your appliance comes with a warranty of two years, starting from
the date of purchase. This warranty covers all manufacturing
defects, provided that:
•
You used, assembled and maintained your appliance
according to the instructions in this manual. Damages
caused by misuse, incorrect assembly or inadequate
maintenance are not regarded as manufacturing defects.
•
You can present the receipt and the unique serial number of
your appliance. This serial number starts with a C, followed
by 15 digits. You can find it:
-
On this manual.
-
On the packaging of the appliance.
-
On the inside of the foot of the appliance.
•
The Barbecook quality department confirms that the parts
are defective and that they proved defective under normal
use, correct assembly and adequate maintenance.
If one of the above conditions is not met, you cannot claim any
form of contribution. In all cases, the warranty is limited to the
repair or replacement of the defective part(s).
9.2 Not covered
The following damages and defects are not covered by the
warranty:
•
Normal wear and tear (rusting, distortion, discolouration...) of
parts that are directly exposed to fire or intense heat. It is
normal to replace these parts from time to time.
•
Visual irregularities that are inherent to the manufacturing
process. These irregularities are not regarded as
manufacturing defects.
•
All damages caused by inadequate maintenance, incorrect
storage, improper assembly or modifications made to
pre-assembled parts.
•
All consequential damages caused by careless or
non-compliant use of the appliance.
•
Rust or discolouration caused by external influences, the use
of aggressive detergents, exposure to chlorine... These
damages are not regarded as manufacturing defects.
Location How remove the rust
Exterior •
Clean and buff the rust spots with a grill brush.
•
Touch-up the affected areas with a good
heat-resistant paint.
Interior •
Clean and buff the rust spots with a grill brush.
•
Lightly coat the affected areas with vegetable oil.
Never apply paint to the interior of the body.
Material How to maintain this material
Enamel
•
Do not use sharp objects and do not knock
against a hard surface.
•
Avoid contact with cold liquids while still hot.
•
You can use metal sponges and abrasive
detergents.
Stainless steel
and chrome
•
Do not use aggressive, abrasive or metal
detergents.
•
Use soft detergents and let them act on the
steel.
•
Use a soft sponge or cloth.
•
Rinse thoroughly after cleaning and dry well
before storing.
Powder
coated
•
Do not use sharp objects. Use soft detergents
and a soft sponge or cloth.
•
Rinse thoroughly after cleaning and dry well
before storing.
Symbol Material
Enamel
Chrome
Stainless steel
Powder coated
Symbol Material
MAN_SMOKERXL_BBC_160106_A.book Page 8 Wednesday, January 6, 2016 4:12 PM