manualshive.com logo in svg

Banner iVu Plus BCR, Руководство пользователя, Страница: 53 / 155

Поделиться
Скачать
Banner iVu Plus BCR Скачать руководство пользователя страница 53

4 Display Modes

In the upper left of the screen is an icon for accessing different Display Modes:

• Display Annotations
• Hide Annotations
• Display Statistics.

4.1 Display/Hide Annotations

Click the icon in the upper-left of the screen to display annotations. When annotations are on, the display shows the data the sensor has
read.

 

 

If the sensor reads more than one barcode in the field of view (FOV), in addition to the read data, the display indicates the index of each
read barcode. In the example below, the top barcode is 1 and the bottom barcode is 2. It is important to note that, if the sensor reads
more than one barcode, only the first barcode data (index #1) can be compared or used in a remote teach operation

 

 

Click the icon in the upper-left of the screen to hide annotations.

 

Rev. B

www.bannerengineering.com - tel: 763-544-3164

53

Содержание iVu Plus BCR




























































































































































Отзывы:

Нет отзывов