Input Pullup
Main Menu > System > Discrete I/O > Input Pullup
The NPN version of the iVu sensor triggers from high to low, and Remote Teach behaves electrically like trigger. If using the NPN version
of the sensor, select Enable.
The PNP version of the iVu sensor triggers from low to high, and Remote Teach behaves electrically like trigger. If using the PNP version
of the sensor, select Disable.
Output 1
Output 1 can be configured for Pass, Fail, Read, No Read, Match, No Match, Missed Trigger, or System Error.
• A Read condition is when the configured number of barcodes are found in a scan. These barcodes must be error-free.
• A No Read condition is when the configured number of barcodes are not found in a scan sequence. This will not occur in Continuous
Scan mode.
• If Data Compare is disabled, Pass and Fail are the same as Read and No Read.
• If the sensor is using Data Compare, Pass indicates that a good barcode was found, and the data compared.
• If the sensor is using Data Compare, Fail indicates that either no good barcode was found, or the data did not compare.
• A Match condition occurs when the required number of barcodes are found and the compare is successful.
• A No Match condition occurs when the required number of barcodes are found, but the compare is not successful.
• A Missed Trigger condition occurs when a trigger is received while sensor is busy inspecting the pervious image. This output signal
will be set to active state. This signal will be reset up on resetting the 'History' on the statistics page.
• A System Error condition occurs when a fatal error is detected on the sensor. This output signal will be set to active state. This signal
can be reset upon resetting the 'History' on the statistics page, or executing a 'ClearSystemError' command through command chan-
nel.
The default setting is Pass and Latched for Output 1. If Pulsed is selected, the default Pulse width is 50 ms.
iVu Plus BCR User's Manual
32
www.bannerengineering.com - tel: 763-544-3164
Rev. B
Содержание iVu Plus BCR
