Banner iVu Plus BCR Скачать руководство пользователя страница 149 | Manualshive

Страница: 149 / 155

background image

11 iVu Series: Updating the Sensor

11.1 Update Process

Banner Engineering may release new versions of the sensor firmware in the future. New firmware releases can be downloaded from
Banner's website or can be obtained by ordering the latest Product CD. The following steps will guide you through the process of updat-
ing the iVu firmware.

Step 1: Copy firmware of desired product to USB Thumb Drive.

1. Launch the iVu Series software

From Product CD:

• Place the latest Product CD into your CD ROM drive. The iVu Series Software will automatically start.
• If your computer is not set for Auto-Play, you may start the iVu Series Software by browsing to the CD drive from My Computer

screen and double-clicking on 'iVuSeries.exe'.

From Banner Website:

• Visit Banner's Website:

http://www.bannerengineering.com

• Browse to Vision Products page and select the iVu product you are using.
• Click on the Software tab to view software releases.
• Determine which version you want to download (Current Version recommended, for example "iVu Series Software Version 2010R4").
• Click on the circular Download button. This will initiate the download process. Depending on your browser settings, you may be

asked to confirm or provide a location to save the file. Choose to download on yoru desktop. Note the file name.

• Double-click the file to start extracting the files and run the iVu Series Software.

2. Select the product you are using and browse to Firmware Update page.

3. Click on 'Run Firmware Update Wizard' and program will start.

4. Follow on-screen instructions. Clicking on 'Copy firmware to USB' will copy the selected firmware to the USB Thumb Drive.

Step 2: Install firmware on iVu

1. Remove the USB Thumb Drive from the PC, and plug it into the sensor.

2. On the sensor, select System -> Firmware Update. The name of the firmware file you copied on the USB Thumb Drive will be dis-
played.

3. Choose correct file and click on the 'Load' button.

4. Follow the steps on the screen to update the firmware.

11.2 How to Set or Modify a Sensor Name

You can set a Sensor Name for your iVu Series sensor or modify an existing name on the sensor using the software keypad. You can
also change the sensor name this using the iVu Emulator as described below.

NOTE: If you are in a language other than English, you cannot modify the sensor name using the software
keypad. Use the procedure described below.

Rev. B

www.bannerengineering.com - tel: 763-544-3164

149

«
...
147
148
149
150
151
...
»

Содержание iVu Plus BCR




























































































































































Отзывы:

Нет отзывов

Похожие инструкции для iVu Plus BCR

Бренд: LAZER Страницы: 13

Бренд: Latento Страницы: 60

Бренд: Easy Quick Страницы: 11

Бренд: Radio Shack Страницы: 2

Бренд: Cane Creek Страницы: 2

Бренд: Garmin Страницы: 26

Бренд: Garmin Страницы: 8

Бренд: Garmin Страницы: 72

Бренд: Hama Страницы: 10

Бренд: Hama Страницы: 6

Бренд: Dataradio Страницы: 72

Бренд: QIMMIQ Страницы: 16

Бренд: QA1 Страницы: 10

Бренд: Harol Страницы: 17

Бренд: Cab Technology Страницы: 10

Бренд: Klarstein Страницы: 24

Бренд: SpectraLink Страницы: 14

Бренд: Julabo Страницы: 16

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды