B&R ACOPOSinverter P84, Руководство пользователя

Страница: 200 / 405

Programming guidelines
200 ACOPOSinverter P84 User's Manual 2.10
2.8.11.5 Incompatible functions
The following functions are not available or are deactivated in the cases described below:
Automatic restart
This function is only possible for the following types of control: [2/3 wire control] (tCC) = [2wire control] (2C) and
[type 2 wire control] (tCt) = [level] (LEL) or [Prio forward] (PFO) .
Catch on the fly
This function is only possible for the following types of control: [2/3 wire control] (tCC) = [2wire control] (2C) and
[type 2 wire control] (tCt) = [level] (LEL) or [Prio forward] (PFO) .
This function is disabled if the automatic activation on holding [Auto DC injection] (AdC) = [permanent] (Ct) .
Via the monitoring menu SUP- ( see "[MONITOR] (SUP-)" on page 131 ), the compatibility of the functions assigned
to each input can be displayed for checking the compatibility.
When a function is assigned, a tick appears on the graphic display terminal, as illustrated in the example
below:
JOG
<< >>
English
RDY
Term +0.00 Hz 0 A
1.7 APPLICATION FUNCT.
Code Quick
REFERENCE SWITCH.
CONFIG REF
RAMP
STOP CONFIGURATION
AUTO DC INJECTION
If you attempt to assign a function that is incompatible with another function that has already been as-
signed, an alarm message will appear:
With the graphic display terminal:
The function cannot be
assigned,
because an incompatible
function is already selected. See
programming manual.
ENT or ESC to continue
(in Automation Studio).
RDY
Term +0.00 Hz
0 A
INCOMPATIBILITY
With integrated display terminal:
COMP
flashes until ENT or ESC is pressed.
When you assign a logic input, an analog input, a reference channel or a bit to a function, pressing the
HELP button will display the functions that may already have been activated by this input, bit or channel.