B&R ACOPOSinverter P84, Руководство пользователя

Страница: 138 / 405

Programming guidelines
138 ACOPOSinverter P84 User's Manual 2.10
2.8.6.6 Internal values and states of the inverter
Code Name/Description Unit
ALGr [Alarm group] : Numbers of the group of the existing alarms.
rPI [Internal PID reference value]: PID reference value via the graphic display terminal (can be retrieved if the function
has been configured).
Process value
MFr [Multiplication factor] (can be activated if [Ref multi] (MA2,MA3) is assigned). %
FrH [Frequency ref.] Hz
trr [Torque reference] : Can be activated if the function is configured. %
rFr [Output frequency] Hz
MMF
[Actual value of the motor speed with sign]
, if an encoder card is present, otherwise display 0. Hz
LCr [I motor] A
OFF [Middle speed ENA] : Parameter can be activated if (EnA) = (YES) Hz
SPd [Motor speed] rpm
UOP [Motor voltage] V
OPr [Motor power] %
Otr [Motor torque] %
ULn
[Line voltage] :
Line voltage detected via the DC bus voltage with operation of the motor or at standstill. V
tHr [Therm State mot] %
tHd [Drive thermal state] %
tHb [Thermal state of the braking resistor] : Can only be activated for inverters with high power. %
APH [Consumption] Wh, kWh or MWh
rtH [Operating time] : Duty cycle of the motor.
PtH [Drive operating time] : Duty cycle of the inverter.
Seconds, min-
utes or hours
tAC [Time Temp AI IGBT] : Duration of alarm triggering "IGBT temperature". Seconds
rPC- [PID reference] : Can be activated if the function is configured.
rPF [PID actual value] : Can be activated if the function is configured.
rPE [PID error] : Can be activated if the function is configured.
Process value
rPO [PID output] : Can be activated if the function is configured. Hz
CnFS [Act. configuration] : CnF0, 1 or 2 (can be activated if the motor or configuration change is valid)
CFPS
[Active parameter set] :
CFP1, 2 or 3 (can be activated if the switching of the parameters is valid)