B&R ACOPOSinverter P84, Руководство пользователя

Страница: 305 / 405

Programming guidelines
ACOPOSinverter P84 User's Manual 2.10 305
[BRAKE RESIST PROTECTION ](brP-) and AUTO-TUNE FAULT] ( tnF-)
Code Name/Description Setting range Factory settings
brP- [BRAKE RESIST PROTECTION]
brO [Braking resistor protection response] [No] (nO)
nO [No] (nO) : No braking resistor protection (this prevents access to the other parameters of the function).
YES [Alarm] (YES) : Alarm. The alarm can be assigned to a logic output or a relay.
FLt
[Fault]
(FLt) : Change to the fault (bOF) with locking of the inverter (freewheel stop).
Note:
The thermal state of the resistance can be displayed on the graphic display screen. It is calculated as long as the inverter control
is connected to the power supply.
brP [Brake resistor power] 0.1 to 1000 kW 0.1 kW
This parameter can be activated if [Braking resistor response] (brO) is not equal to [No] (nO) .
Nominal power of the resistance used.
brU [Brake resistor value] 0.1 to 200 Ω 0.1 Ω
This parameter can be activated if [Braking resistor response] (brO) is not equal to [No] (nO) .
Nominal value of the braking resistor in ohms.
tnF- [AUTO TUNING FAULT]
tnL [Autotune fault mgt] [freewheel stop] (YES)
nO [No] (nO) : Fault is ignored.
YES [freewheel stop] (YES) : Freewheel stop
Parameter that can be modified during operation or when stopped.