B&R ACOPOSinverter P84, Руководство пользователя

Страница: 316 / 405

Programming guidelines
316 ACOPOSinverter P84 User's Manual 2.10
Factory setting parameters
Code Name/Description
FCSI [Config. Source]
Choice of source configuration.
InI
[Use macro conf]]
(InI) : Factory configuration; return to the selected macro configuration.
CFG1 [Config 1] (CFG1)
CFG2 [Config 2] (CFG2)
If the function has been configured to a configuration change, [Config 1] (CFG1) and [Config 2] (CFG2) can no longer be accessed.
FrY- [PARAMETER GROUP LIST]
List of menus to be loaded
ALL [All] (ALL) : All parameters
drM
[Drive config]
(drM) : The menu
[DRIVE MENU]
without
[COMMUNICATION]
.
In menu [DISPLAY CONFIG.] , [Return std name] changes to [No] .
SEt [Settings] (SEt) : The menu [SETTINGS] without the parameter [IR-compens.] (UFr) , [slip comp.] (SLP) and [Therm. rated current] (ItH) .
MOt [Motor parameters] (MOt) : Motor parameters, see list below.
The following selection options are only available if [Selection config.] (FCSI) = [Macro config.] (InI) :
COM [COMMUNICATION] (COM) : The menu [COMMUNICATION] without [Adr Scan In 1] (nMA1) to [Adr Scan In 8] (nMA8) and with-
out [Adr. Scan Out1] (nCA1) to [Adr. Scan Out8] (nCA8) .
MOn [Menu display] (MOn) : The menu [SELECT DISPLAY TYPE]
dIS [MenU Display] (dIS) : The menu [DISPLAY CONFIG.]
Note:
If the factory configuration is selected and after restoring the factory setting [PARAMETER GROUP] is empty.
GFS [Goto FACTORY SETTINGS]
It is only possible to revert to the factory settings if at least one group of parameters has previously been selected.
With the integrated display terminal:
nO No
YES Yes: Hold the key for 2 seconds. The parameter changes automatically to (nO) when the process is complete.
With graphics terminal: See previous page.
SCSI [Save config]
nO [No] (nO)
Str0
[Config 0]
(Str0) : Hold the ENT key for two seconds at the integrated display terminal.
Str1 [Config 1] (Str1) : Hold the ENT key for two seconds at the integrated display terminal.
Str2 [Config 2] (Str2) : Hold the ENT key for two seconds at the integrated display terminal.
The active configuration to be saved does not appear for selection. If it is, for example, the configuration [Config 0] (Str0) , then only [Config 1]
(Str1) and [Config 2] (Str2) are displayed. The parameter changes automatically to [No] (nO) when the process is complete.